Puncture Repair Newcastle Upon Tyne

Have you ever worried about being stuck anywhere near Newcastle Upon Tyne due to a sudden tyre puncture?

Then you should store our number in your phone so you can contact Walbottle Tyre Services if you ever need an emergency puncture repair Newcastle Upon Tyne. We are a well-known company in and around Newcastle Upon Tyne for affordable tyre services.

• We follow all BS AU 159 standards when inspecting the punctured area so we can decide which repair procedure is best. If your car’s tyre meets the following parameters, we will proceed with the repair work:
• The tyre’s tread-depth is no less than 1.6mm (the legal minimum).
• The damaged area is not more than 6 mm in diameter.
• There are no cords exposed or excessively deep cuts visible on the tyre.
• The sidewalls of the tyre have no visible damage, bulges, etc.
• Any previous repairs on the tyre must comply with the BS AU 159 standards.

Unfortunately, we cannot repair tyres that have previously been repaired using a DIY kit.

Also, Run-flat tyres are not considered safe for repairs as once used without air pressure, the structure of the tyre changes.

In these cases, a tyre change is necessary.

For tyre repairs/changes, you can visit us at Unit 2 High Street Newburn NE15 8LN or give us a call, and we will come to you. You can also book our services online, using this website’s booking system.

Our mobile service team is always ready to help.

For puncture repair Newcastle Upon Tyne, we use one of these techniques to fix the puncture in no time:

How Do We Perform Car Puncture Repairs Newcastle Upon Tyne?

We deploy advanced tools and implement the latest techniques while repairing flat tyres. Check out one of our techniques and decide if we are a viable solution to your “puncture repair near me” searches:

• First, we dismount the wheel with the flat tyre from your vehicle. After removing the tyre, we carefully look at the punctured area and mark it.
• Next, we use a carbide mill cutter of 6mm and make a puncture channel from both inside and outside of your car tyre.
• After that, we will use a pre-buff-cleaner to pre-clean its punctured area and put a patch on it to draw outer and inner lines.
• Next, we will flatten curbs that have appeared on your car tyre with a buffing rasp and also buff its inner lining.
• We will then rub a special vulcanisation solution on the puncture- channel and buffed area.
• After that, we will use a patch and insert a plug to fix the damaged part.
• We will fix the buffed area and plug and patch the portion with a sealant.
• Finally, we will fit the tyre back onto the wheel and carry out a wheel balancing check.
• We then re-mount the wheel/tyre assembly and inflate the tyre.

You see, there is no longer a need to search for top tyre repairs Newcastle Upon Tyne.

Do you need help? We are here for you!